Echo Rentals
Equipment Support Progran Resource Guide Rev5.1
Rental EQUIPMENT
Paralleling Reels
46W x 3 A-Frame Width: 46.25" Drum Diameter: 28" & 36" Reel Diameter: 57" Compartment Width: 9" Height & Length: 44.25"H 49"L
300 Series with Casters
A-Frame Width: 46.5" Drum Diameter: 15" Reel Diameter: 39.5" Compartment Width: (1) 5.75" (2) 3.25" Height & Length: 44"H 49"L
46W x 2 A-Frame Width: 46.25" Drum Diameter: 36" Reel Diameter 1 & 2: 68" 57" Compartment Width: (1) 21.5" (2) 11.5" Height & Length: 44.25"H 49"L
750 Series with Free Spin Compartment
A-Frame Width: 51" Drum Diameter: 15" Reel Diameter: 55"
Compartment Width: (1) 8" (3) 9" Height & Length: 44.25"H 49"L
325 Series with 2 Free Spin Compartments A-Frame Width: 43" Drum Diameter: 15" Reel Diameter: 39.5" Compartment Width: (2) 4" (3) 6" Height & Length: 31.5"H 36"L
325 Series + Sidecar Sidecar Specs A-Frame Width: 46.25" Drum Diameter: 15" Reel Diameter: 37" Compartment Width: 5" Height & Length: 44.25"H 49"L
200 Series A-Frame Width: 43" Drum Diameter: 15" Reel Diameter: 39.5" Compartment Width: (1) 6.5" (3) 6" Height & Length: 31.5"H 36"L
75 Series A-Frame Width: 34" Drum Diameter: 15.5" Reel Diameter: 37" Compartment Width: 9" Height & Length: 44.25"H 49"L
75 Series + Sidecar Sidecar Specs A-Frame Width: 46.25" Drum Diameter: 15" Reel Diameter: 37" Compartment Width: 5" Height & Length: 44.25"H 49"L
50 Series A-Frame Width: 29" Drum Diameter: 15" Reel Diameter: 39.5" Compartment Width: (1) 2.5" (4) 3.25" Height & Length: 44.25"H 38"L
1
Tools & Equipment
Large Capacity Reel Stand Weight Capacity: 10,000 lbs. Reel Size: up to 10 ft.
30K Reel Roller Weight Capacity: 30,000 lbs. Reel Size: up to 96" x 12 ft. Dimensions: 122"W x 19"H x 61"D
Southwire RR-SW30 30K Reel Roller Handles up to 30,000 lbs. Stackable up to 4 units. Speed control adjustment. Foot control for remote operation. Heavy duty 10A motor. Convenient fork tubes on both sides.
Instruction Manual
Southwire MPJ02 PROJAX Reel Stand One person can easily transport through most jobsite environments. Minimum drill recommendations: 18V cordless, equivalent of 1000 in. lb. torque rated for reels 10,000 lb. Easy adjustment for uneven surfaces. Axle rests on steel rollers or easy wire pay off. Axle safety guard ensures that reel will not fall of jack stands. On board Southwire PROJAX Axle holder. Can lift up to 10,000 lb. (pair). Can be used with 1-1/4" - 3" axle.
Instruction Manual
Southwire Maxis MJ707 Jax Reel Stands A unique reel stand that will quickly set up and lift reels of wire safely and efficiently without the hassle of conventional reel stands. Each pair lifts wire reels up to 3,000 lbs.
Instruction Manual
iTOOLco RBJ20K Real Big Jacks Jack Stand Holds up to 20,000 lbs. Made from US steel. Axle rides on 4 large bearing-ed rollers. Feed from your own trailer. Load capacity: 10,000 lbs. on wheels, 20,000 lbs. when wheels are removed. Telescoping to t different width spools. Load and reload with a forklift.
Instruction Manual
2
Tools & Equipment
iTOOLco RT01 Real Tender Rope Tender Light and maneuverable, easy for one person to set up and transport. Can be used horizontally or vertically. Crank handle for faster re-spooling. Capacity: 12"-35" spool widths, 12"-32" spool diameters, 300 lbs. weight limit.
Instruction Manual
iTOOLco MC300 MC Cart Fits through 32" doorways when loaded. Flexible con guration is interchangeable and can hold: (2) 1000' spools fo MC, (1) 250' coil of MC, (4) 500' spools of #12 wire, (2) 2500' spools of #10 and/or #12 wire, or wire bar can hold (2) 12-1/2" spools.
Instruction Manual
Southwire CM01 Caddy Mac #1 Transports spools on 1/2" solid spindles and works as a dolly. Wire can be dispensed while lying at.
Southwire WW510 Wire Wagon 510 XL conduit and wire cart. Holds up to 14 - 2,500' spools. Holds several hundred feet of conduit as well as all the additional materials and tools needed for your entire work day. Designed with a full 24"x60" metal top shelf for storage and assembly. 2,000 lb. capacity.
Southwire CK-01 SIMpull CoilPAK Cart Rugged transport system for (8) SIMpull CoilPAK Payoffs with an integrated pay off system. Allows CoilPAK Payoffs to be added or changed easily without impacting other CoilPAK Payoffs. Innovative staging springs allow you to secure and organize up to 8 wires. Best for scenarios where conductors are frequently changing, adding or dropping.
Southwire SBT02 SIMpull BARREL Tripod The SIMpull BARREL Tripod is a circuit wire guide that mounts easily on the rim of the SIMpull BARREL. This wire guide system provides a unique means for guiding the paralleled conductors out of the barrel when it is not on the SIMpull BARREL Hand Truck.
3
Tools & Equipment
Southwire SBT01 SIMpull BARREL Hand Truck The SIMpull BARREL Hand Truck, when used with the SIMpull BARREL package, replaces the old wire cart and reels and the issues associated with them. The Hand Truck includes a wire payoff feature, and is designed to transport the SIMpull BARREL package anywhere on the jobsite - through narrow electrical room doors, over cords on the oor or construction gravel.
Southwire Maxis Grips Pulling Heads Dual lock pulling system using both a cam lock head and a double braided wire to quickly secure cable to rope without the fear of losing a conductor.
Instruction Manual
Southwire Double Braided Pulling Rope Southwire's cable pulling ropes are double-braided with an inner core and an extra double-braided outer jacket for added strength and less stretch; white with green tracer. Rot and mildew resistant. Factory spliced eyes at both ends. Lowest stretch. Select a rope with maximum rated capacity that meets or exceeds the cable puller's maximum pulling force.
Southwire QWIKrope An innovative new high performance pulling rope that is UV resistant, lightweight and ultra low stretch for all your feeder and circuit wire solutions. QWIKrope for feeder pulls comes in 300', 600', 900' and 1200' lengths while the QWIKrope for circuit wire pulls comes in 300' & 600' lengths.
Southwire Maxis Rope Clevis Connects pulling head and pulling rope to eliminate winding and tangling of rope and wire during cable pulls. Sizes: 1-1/4" and 1-5/8"
Greenlee UT2 Ultra Tugger 2 Cable Puller Pulling capabilities: 3 x 500 kcmil cable 500' with 2 x 90 degree bends, 3 x 250 kcmil cable 500' with 4 x 90 degree bends, 8 x 4/0 AWG cable 500' with 3 x 90 degree bends.
Instruction Manual
4
Tools & Equipment
Greenlee 6805A Cable Puller This Greenlee cable puller is a safe and efficient way to pull cabling and wiring through conduit runs. Maximum pull force: 800 lbs., Continuous pull force: 6500 lbs., No load: pulls at 9' per minute, 2000 lbs.: 8 fpm, 4000 lbs., 7.5 fpm, 6000 lbs.: 7 fpm, 8000 lbs.: 6 fpm. Easy to move around the jobsite with mobile carriage.
Instruction Manual
Greenlee G3 Tugger Cable Puller High speed pulls up to 1000 lbs. Durable motor designed for pulling load. Fast setup, no loose pieces. High speed: 97 fpm. Low speed: 41 fpm. Continuous rating: 1200 lbs. Intermittent rating: 2000 lbs.
Instruction Manual
Greenlee G6 TURBO 6000 LB Cable Puller Setup in less than 60 seconds. No loose pieces. No adapter needed. Dual capstans increase pulling speeds and maximize efficiency. Two speed motor designed for 6,000 lb. pulls. Circuit breaker monitor for safe auto shutoff. Right-angle sheave allows the operator to stand out of the direct line of force.
Instruction Manual
Southwire Maxis MCF-01 Cable Feeder Designed and built speci cally to accommodate SIMpull wire. Quick one person setup and operation. Variable speed, forward and reverse up to 30 fpm. Easily adjust wire tension during operation. Dual anchoring mechanism. Cable capacity: 8 x 250 MCM, 6 x 500 MCM and 5 x 750 MCM.
Instruction Manual
Southwire Maxis M6K Heavy Duty Cable Puller One person, 2 minute setup and operate. Quickly adapts from underground to overhead pulls. No need to bolt to ground on most pulls. 6000 lbs. peak pulling force. Versatile, can adapt to virtually any wire pull. Can be anchored to most trucks standard 2" receiving hitch. Able to pull 9 ft. of wire out of conduit.
Instruction Manual
Southwire P6T02 - M6K Tripod Attach to the Maxis M6K Cable Puller to make underground wire pulls simple and easy. Helps when pulling from transformer pads, vaults and meter bases.
5
Tools & Equipment
Southwire Maxis M3K-M Cable Puller 3,000 lb. cable puller that only requires one person to set up in less than 2 minutes. The Maxis 3K cable puller features 2 pulling speeds, 25 fpm at low and 100 fpm on high. The M3K-M is able to quickly adapt from underground to overhead pulls.
Instruction Manual
Southwire Maxis XD10 EXTREME Duty Cable Puller The Maxis XD10 EXTREME Duty Cable Puller is designed to get the job done, thriving in the most extreme pulling conditions. The XD10 allows you to pull faster and safer up to 10,000 lbs.
Instruction Manual
Southwire XDTM Extreme Duty Tension Monitor for XD10 10,000 lb. inline tension monitor. USB port for data extraction. Back lit screen. Easily inserts into Rope-Line without disassembly. 5 roller design means one calibration covers full range of rope sizes. Top handle for easy mounting.
Southwire Maxis XD1 EXTREME Duty Circuit Puller 600 lbs. of constant pulling force with 1000 lbs. peak pulling force. Lightweight and portable, one person set-up and operation. Accepts most commercial 18V cordless drills. Removable capstan to facilitate rope removal. Expandable length with 1" rigid conduit. Polyline pin on capstan to prevent rope slippage during the pull. Threaded receiver for 3/4" monopole support.
Instruction Manual
Southwire TSS01 Triggers Wireless Safety Switch System Safety system designed to control the input power of any piece of jobsite equipment. Works with all brands of electrically driven equipment. High visibility LED status lights. Monitors amperage draw indicating when to switch puller to low speed. Foot controls contain dual redundant activation switches. 3.4 amp hour lithium ion battery packs.
Instruction Manual
Southwire FB-01 Triggers Adapter Feeder adapter for Southwire TSS01 Triggers wireless safety switch system.
6
Tools & Equipment
Condux 08083210F 9/16" x 1,000' Duct Rodder with Ft. Marks Condux Duct Rodders combine ease of operation and reliable performance to help increase the efficiency of your rodding operations. Cages are light weight with sturdy construction and have a hand-operated wheel brake. Equipped with a threaded end tting on each end, and a tapered head on the outward end.
Condux 08072550 1/4" x 500' Duct Rodder Condux Duct Rodders combine ease of operation and reliable performance to help increase the efficiency of your rodding operations. Cages are light weight with sturdy construction and have a hand-operated wheel brake. Equipped with a threaded end tting on each end, and a tapered head on the outward end.
Condux 08674750 Adjustable Manhole Adapter Allows greater stability and versatility for manhole pulls. Rugged aluminum frame provides an adjustable platform to t 18" to 46" manholes. Use the frame to position a cable puller above a manhole. Installation is easy, the t is secure, and the strength is a maximum of 12,000 lbs.
Condux 08674760 4" Plate Adapter For use with Condux 08674750 Adjustable Manhole Adapter.
Condux 08674752 6" Plate Adapter For use with Condux 08674750 Adjustable Manhole Adapter.
Condux Cable Feeding Sheaves Plugs into conduit in manhole wall. 2 sizes available.
4" wide - # 08617340 6" wide - # 08617260
7
Tools & Equipment
Hook Type Sheaves - 8,000 lb. Capacity HD hook sheaves. 4 sizes available: 12" diameter, 5"W, 24 lbs. - # 812
24" diameter, 6-1/2"W, 69 lbs. - # 824 36" diameter, 6-3/4"W, 101 lbs. - # 836
18" diameter, 6"W, 46 lbs. - # 818
Greenlee 441 Series Cable Feeding Sheaves Yoke frame slides into the end of conduit. 7 sizes available. 2" wide - # 441-2 3-1/2" wide - # 441-3-1/2
6" wide - # 441-6
2-1/2" wide - # 441-2-1/2
4" wide - # 441-4 5" wide - # 441-5
3" wide - # 441-3
Instruction Manual
HIS HDR6-12x7A HIS duct rollers are designed to assist in guiding cables into ducts or conduit and help reduce "Cable Scuffing" on the edge of duct or conduit. The "Slotted-Duct-Adapter" assists in removing this tool from the cable, once the cable is pulled into place.
HIS HRR-D12-7A / HRR-D10-5A HIS rim rollers are lightweight, with two high-strength sheave-type cable guides. The units can be used for guiding cable into or out of vaults and hand-holes. The powder-coated frame protects cable scuffing and locks to the edge of the vault when pull force is applied.
HIS HB4A HB4A cross-tray roller is designed for guiding cable into inside vertical risers in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB4A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.
HIS HB5A HB5A cross-tray roller is designed for guiding cables around horizontal elbows in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB5A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall. Optional clamps are available for other sidewall heights.
8
Tools & Equipment
iTOOLco TRA500 Cable Tray Roller Attachment The iTOOLco Cable Tray Roller Attachment is compatible with the 5" Tray Roller and Adjustable Tray Roller and traps conductors for vertical and horizontal elevation changes.
iTOOLco MR36 36" Multi-Roller The 36" Multi-Roller features extra wide, pro led phenolic rollers. Rollers ride on rated bearings. Extra deep side walls (made from 1/4" 6061 aluminum) offer a light yet durable tool. The adjustable picking arms allow users to ne tune the adjustment angle without extra rigging.
iTOOLco ATR500 Adjustable Tray Roller iTOOLco's Adjustable Cable Tray Roller is the perfect upgrade from a standard cable roller. Designed to save time by installing quickly, it has a slide support that can be extended to t on tray rung spaces from 10" to 21-1/4".
Greenlee CTR200 Heavy Duty Cable Roller Cable pulling tool has no loose pieces. 6' long durable retractable ratchet strap for sturdy assembly onto tray. Closed conveyor roller guide that traps cable within guide without damaging cable jacket. Mounting system above tray. Easily handle forces up to 200 lbs. 4 conveyor roller guide with 2 retained spring pull-pin release to easily remove cable.
Instruction Manual
HIS HB1A-6 Cable tray roller HB1A-6 is a 6" split-box type cable roller guide designed to quickly and easily clamp-on to the side of the cable tray and hinge to open and close to allow cable to pass through. Aluminum base casting. Quick tee-handle clamp on. 3/8" locking pin for locking and unlocking unit.
HIS HB1A-9 Universal cable tray roller HB1A-9 is a hybrid roller guide between the split-box design of the HIS HB1A and the size of the HIS HB9A, and can also be used on horizontal elbows. Can be mounted on the cross-bar. Can be extended above or below cable tray with a cross-bar and extended tray clamps. Can be mounted on the side of the cable tray using the quick side tray clamp.
9
Tools & Equipment
HIS HB1A-9-STC Used for clamping universal cable tray roller HB1A-9 to the sidewall of the cable tray.
HIS HB9A HB9A cross-tray roller is a low pro le cross-tray roller assembly designed for guiding cable into outside vertical risers and through straight sections of cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers, or several in-line on the straight section of cable tray. HIS model HB9A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.
iTOOLco TR9010 10" 90° Trapping Tray Roller iTOOLco's 90° Trapping Tray Rollers install in 3 easy steps and are compatible with more construction substrates that the competition. 1. Drop-over, 2. Tighten, 3. Pin. Navigating difficult corners is a snap. 2 Trapping Tray Rollers of the same size combine to encase conductors and handle elevation changes. Opens and closes from either side.
Instruction Manual
iTOOLco TR9005 5" 90° Trapping Tray Roller iTOOLco's 90° Trapping Tray Rollers install in 3 easy steps and are compatible with more construction substrates that the competition. 1. Drop-over, 2. Tighten, 3. Pin. Navigating difficult corners is a snap. 2 Trapping Tray Rollers of the same size combine to encase conductors and handle elevation changes. Opens and closes from either side.
Instruction Manual
iTOOLco TRM750 5/8" & 3/4" Threaded Rod Mount Simply mount both brackets above or below your trapeze on the threaded rod, install the framing member, and drop the tray roller over. Once wire pull is complete, simply open the tray roller and drop conductors out into their nal nested position.
Southwire PB2000 BENDmax Power Bender 3/4"-2" EMT, IMC and Rigid conduit bender. Programmable springback incorporated into digital display. Large analog protractor for accurate bends. 2 degree leveling adjustment. Bends in vertical and horizontal planes.
Instruction Manual
10
Tools & Equipment
Greenlee 555 Conduit Bender One bender to bend EMT, IMC and rigid conduit. Fast and easy setup on the jobsite. Steel reinforced follow bars for long life. Optional 1813 Bending Table and accessories for easier operation.
Instruction Manual
Greenlee 881-MBT Mobile Bending Table For bending 2" - 4" pipe. Locking swivel wheels for maneuverability. Fork pockets to easily move unit with fork truck. Carriage assembly to mount the 881 bender unit directly to the MBT. Vice chain to hold conduit securely for accurate bends, prevents conduit from twisting or turning during bend. Pump basket holds the hydraulic pump for the 881 unit.
Instruction Manual
Greenlee 777 Hydraulic Pipe Bender with 980 Pump For rigid conduit 1-1/4" to 2" one-shot 90° bending, and 2-1/2" to 4" segment bending. Strong, portable pin-assembled aluminum components. Easy-to-use ram travel scale and bending charts. Conduit supports index to suite all sizes.
Instruction Manual
Greenlee 980 Hydraulic Pump For use with all Greenlee benders. Pendant advance control. Low voltage pendant coupled to solid state motor controls eliminates contact arcing for greater reliability. Automatic or manual ram return selector valve. Use with single-hose hydraulic systems with spring return arms.
Instruction Manual
Southwire PVCB-06M 1/2" to 6" Powered PVC Bender 6300W, 230 VAC, 28A PVC bender. Adjustable roller stand to support long conduit lengths. Solid 6" wheels for easy maneuverability. Label includes NEC bending tables.
Instruction Manual
Stackable Conduit & Pipe Rack 1000 lb. capacity. 8" diameter casters with two swivels for maximum mobility. Seven independent bins. Collapsible and stackable design for storage and transportation of one or more racks.
11
Tools & Equipment
Wemco Conduit Cart 3,000 lb. capacity. Easily transport oversized raw materials. Open cradle design for easy loading and unloading. Can hold a master bundle of one size conduit.
iTOOLco VMC3000 Visual Material Center iTOOLco's Visual Material Center holds up to (24) 2500' spools of wire, up to (13) 2x4 light xtures, or 3000 lbs. of material. With a lockable design, you can access materials from two sides of the cart and it ts through 30" door. 4 lifting eyes and top design forklift pockets make quick work of transporting the VMC to, from and around the jobsite.
Instruction Manual
Jamco VD260 Mesh Storage Cabinet Closed storage cabinet to secure materials or valuables. All welded construction, adjustable middle shelf, 12 gauge construction and powder coated nish. Dimensions: 24"D x 57"H x 60"W.
Greenlee 5860 Bi-Fold Utility Cabinet Maximum storage capacity with minimum oor space requirements. Four individual 15"D x 4-1/2"H x 60"W storage compartments on each side. Reinforced steel shelves welded in place for added strength and durability. Each bi-fold section is mounted on four caters for easy opening and closing. Padlock compatible.
Woodhead 130138-0126 Power Distribution Box NEMA Type 3R Rainproof. 50A input rating, 7 outputs: (6) NEMA 5-20 straight duplex receptacles, (1) NEMA L6-30 locking receptacle.
Southwire 019603R02 50A X-Treme Box 50A temporary power box with twist-lock receptacles, sled base. 50A 125/250V inlet, (6) 20A 125/250V NEMA L5-20R outlets, (1) 50A 125/250V outlet, (1) 30A 250V L6-30R outlet
Instruction Manual
12
Tools & Equipment
Southwire 6532UGM1 Mini 30A X-Treme Box 30A portable distribution box with 8 straight blade outlets. 30A 125/250V L14-30 inlet, (4) 20A 125V NEMA 5-20R duplex receptacles, (2) 20A breakers, (2) 20A GFCI with auto reset
Southwire 11301LED Wobblelight 150W LED Worklight Carry handle and power cord, 360° lighting with 60' lighting range, integrated receptacle for interlinking up to 6 units, IP54 rated with hoisting and security point.
Instruction Manual
Milwaukee 2779-22 M18 FORCE LOGIC 750 MCM Crimper with ONE-KEY Produces cULus classi ed crimps according to the UL 486A-B classi cation standards for #8 - 750 MCM Cu and Dual Rated Anderson, Blackburn, Burndy, Ilsco, Panduit, Penn-Union and Thomas and Betts connectors. Accepts Burndy U-Dies.
Instruction Manual
Burndy PAT750T3 12-Ton Crimper with T3 Technology The PAT750T3 has all of the exceptional features of its PATRIOT predecessor, plus a new ergonomic design and T3 technology. The TRACK TRACE TRANSMIT intelligence feature provides critical crimping information for all projects. Data collected by the PAT750T3 provides users a new level of con dence that their Burndy crimper is performing to speci cation.
Burndy PAT 750 Patriot Crimping Tool with Die Set Battery-actuated hydraulic crimping tool features an audible "pop-off" crimp indicator and an ergonomically balanced design to lessen fatigue. Provides a reliable connection up to 750 kcmil with standard "U" dies. Output force: 12 tons, Tool Weight: 16.5 lbs. with battery, Operating voltage: 18V-DC, Battery Recharge Time: under 45 minutes.
Burndy PAT444ST3 11-Ton Dieless Crimper with T3 Technology The PAT444ST3 has all of the exceptional features of its PATRIOT predecessor, plus a new ergonomic design and T3 technology. The TRACK TRACE TRANSMIT intelligence feature provides critical crimping information for all projects. Data collected by the PAT44ST3 provides users a new level of con dence that their Burndy crimper is performing to speci cation.
13
Tools & Equipment
Burndy PAT 644 Patriot Dieless Crimping Tool The Burndy Patriot series of battery actuated tools can be operated with only one hand, which allows the other hand to be free to position the connector and conductor prior to crimping. The PAT644XT-18V incorporates the latest engineering technology with patent pending pump, transmission and piston component designs. The self-contained hydraulic tool provides a consistent, reliable connection every time.
Burndy 12-Ton U-Die Sets Use with: Y35, Y39, Y750/PAT750 and Y46/PAT46 series. Y46/PAT46 series require use of PUADP-1 adapter for Type YA, YS, YA-A, YS-A non-tension connectors.
Wire Size
Cu Part #
Al Part #
Wire Size 400 kcmil 500 kcmil
Al Part #
Cu Part #
Wire Size
Al Part #
Cu Part #
#8 #6 #4 #3 #2 #1
U8CRT U5CRT U5CRT U3CRT U2CRT
U8CABT U6CABT U2CABT
U32RT U34RT
U32ART U34ART
1/0 2/0 3/0 4/0
U25RT U26RT U27RT U28RT U29RT U30RT
U25ART U26ART U27ART U28ART U29ART U30ART
535 ex
U38XRT
-
-
600 kcmil 750 kcmil
U36RT U39RT
U36ART
U2CABT U1CART
U39ART-2
250 kcmil 300 kcmil
U1CRT-1
777 ex
U44XRT
-
* IDEAL 35-078 Power Blade Cutter Extremely Versatile: ts almost any drill (12V minimum) cuts up to 750 MCM hard drawn copper, 1000 MCM aluminum. Heavy-duty gears and specially hardened blades for professional quality. Rounded blade design minimizes cable distortion during cutting. Works with the drill you already carry. * Drill not included.
Instruction Manual
* Greenlee ESC85L11 Gator Cable Cutter For cutting large diameter underground power and communication cables. Features retraction stop, LED battery charge and tool maintenance status indication, two-stage hydraulic system, scissor-style blades, side handle, forward handle position, overmolded tacky grip, one trigger control for all functions, 350° rotatable cutting head, LED work light. * 18V lithium ion battery and charger not included.
Milwaukee 2776R-21 M18 Force Logic 3" Underground Cable Cutter with Wireless Remote Cuts up to 1500MCM copper 15kV wirelessly. Cuts in local or remote mode. Fully enclosed high speed hydraulic pump, brushless motor, REDLINK electronics and REDLITHIUM battery. Includes remote, battery, charger, carabineer and bag.
14
Tools & Equipment
Milwaukee 2672-21 M18 Force Logic Cable Cutter Compact tool cuts up to 750MCM copper or 1000MCM aluminum. Milwaukee Powerstate brushless motor and REDLITHIUM battery. Makes over 250 cuts per charge. Kit includes battery, charger and case.
Greenlee ETS8LX11 Cable Tray / Bolt Cutter Cuts basket style cable tray wires in 2 seconds. Makes ush cuts. 18V Li-ion battery. One trigger controls all tool functions. Cutting head rotates 350°. Tools automatically retract when the cutting cycle is complete. LED work light illuminates dark work areas.
Instruction Manual
Cablol Cutyl Electric Cable Tray Cutter Cuty l makes cutting Cablo l cable management easy. This lightweight power tool features a 330° swivel cutting head to make cuts from any angle. One button control engages and retracts blade for each cut.
Lackmond Core Drill & Rig System Beast / B+BTec BCR130/5BG with Second Back Grip & Compact Drill Stand Hand held core drill with a back-grip for drilling vertical holes. 2.6HP motor and 3-speed gearing for drilling at any diameter. Beast / B+BTec core drills are extremely powerful and loaded with features including an LED motor overload protection system. 5" dia. bit cap.
Southwire MP-02 Max Punch Stainless Steel Dies 1/2" to 2" with Drive Unit
Cuts through 10 gauge steel, aluminum, berglass and plastics. Will not bow panel or leave jagged edges. Thread-in / thread-out removable 1-1/8" draw stud. Minimum drill recommendations: 18V cordless, equivalent of 550 in. lbs. torque rated.
Southwire MP-03PRO Max Punch Stainless Steel Dies 2-1/2" to 4"
Cuts through 10 gauge steel, aluminum, berglass and plastics. Will not bow panel or leave jagged edges. Thread-in / thread-out removable 1-1/8" draw stud. Minimum drill recommendations: 18V cordless, equivalent of 550 in. lbs. torque rated.
Instruction Manual
15
Tools & Equipment
Southwire MPHSP Max Punch Hydraulic Stud Punch Designed to quickly punch holes through 16 gauge structural steel studs. The multifaceted design allows the NPHSP to easily adjust for 3-5/8" and 6" studs as well as punch 7/8" or 1-11/32" holes.
Instruction Manual
CEAS Stiffy Powder Actuated Tool Overhead attachment tool for concrete, wood and steel applications. .27 caliber powder actuated. Actuated by an upper pole impact motion against work surface.
Stiffy Telescoping Pole Tool 2 Stage, 6' to 12'
Ridgid SeekTech SR-20 Locator with Transmitter & Clamp Lightweight, rugged utility line locator that provides all of the information you need for locating underground cables and pipes. If features an omnidirectional antenna array and gradient antennas to quickly located and follow the target line's path.
Instruction Manual
Fluke 435-II 3-Phase Power Quality & Energy Analyzer At-a-glance power quality health data in real time so you can make better maintenance decisions. Energy loss calculator. Highest safety rating in the industry: CAT III 1000V / CAT IV 600V.
Instruction Manual
Siemens IDT5000 Intelli-Arc Diagnostic Tool Arc Fault Circuit Interrupters (AFCIs) are an important technology available to electrical contractors as they work to build safe, efficient electrical distribution systems. Diagnosing the cause of AFCI trips can be confusing, but the new Intelli-Arc Diagnostic Tool and the unique trip indicators built into every Siemens AFCI are valuable analysis tools to help electricians pinpoint the fault that causes the breaker to trip.
Instruction Manual
IDEAL 61-795 Megger 1kV Insulation Tester Checks new installations for proper insulations, checks existing installations and motor windings for breakdowns in insulation. Test voltages: 250/500/1000V; AC/DC voltage to 600V battery test; Cat III - 300V; Cat IV - 600V. With carry case.
Instruction Manual
16
Tools & Equipment
Megger MIT510/2 5kV The Megger MIT510 5kV insulation resistance tester is designed speci cally to assist you with the testing and maintenance of high voltage electrical equipment. The case is incredibly rugged and easy to carry, being made of tough polypropylene and achieving an ingress protection rating of IP45.
IDEAL 61-844 Thermal Imaging Camera Blended thermal/digital image. Hottest/coldest temperatures displayed instantly on live screen. Fully radiometric and temperature measurements can be made over entire image.
Fluke TiX500 Infrared Camera Navigate around hard to reach objects with the industry's only 320x240 IR camera with a 5.7" touchscreen LCD and full 240° rotating lens. Edit emissivity, background temp, transmissivity, palettes, color alarms, IR-Fusion and enable/disable markers all on camera. Quantity of 1 available for rent.
Instruction Manual
Skyjack SJ4740 Electric Scissor Lift Work Height: 44' 11"
Platform Width (Inside Railing): 42" Platform Inside Length (Retracted): 86"
Raised Platform Height: 38' 11" Lowered Platform Height: 55.6"
Extension Deck (Roll Out): 3'
Overall Width: 47"
Ground Clearance (Pothole Raised): 4.5"
Overall Length (Platform Retracted): 94.7"
Wheelbase: 73" Weight: 6,385 lbs.
Stowed Height (Rails Up): 99.5" Stowed Height (Rails Down): 79.6"
Capacity (Overall): 770 lbs.
Council Bluffs / Omaha metro area
Instruction Manual
17
Jobsite Trucks & Trailers
Truck & Multi-Reel Trailer
Single Reel Trailer
18
Mobile Diesel Generators
Caterpillar XQ20 18kW Generator Standby power: 20 kW, 25 kVA Prime power: 18 kW, 22.5 kVA
Baldor TS35 30kW Generator Standby power: 30 kW, 37 kVA Prime power: 27 kW, 33 kVA
Instruction Manual
Baldor TS45 38kW Generator Standby power: 38 kW, 48 kVA Prime power: 35 kW, 44 kVA
Instruction Manual
Winco RP80 62kW Generator - 2 Units Available
Standby power: 62 kW, 78 kVA Prime power: 55.8 kW, 70 kVA
Instruction Manual
19
Notes
Notes
Conex Service
Job-Site Ready Conex Box Rental X Features • Mobile Office and Inventory Storage oor plans • Delivery, removal and relocation available
12 ft. Storage • Storage Only
10' x 2' SHELVING
• Storage with Shelves
3 SHELVES ON 1 SIDE
X 20 ft. Ofce or Storage • Storage Only • Storage with Shelves • Office X 40 ft. Ofce or Storage • Storage Only • Storage with Shelves • Office + Storage X Delivery & Removal
WHITE BOARD
18' x 2' SHELVING
TV
3 SHELVES PER SIDE
136 SQ. FT. OFFICE AREA
HEAT & A/C
18' x 2' SHELVING
WHITE BOARD
38' x 2' SHELVING
3 SHELVES PER SIDE
38' x 2' SHELVING
WHITE BOARD
TV
136 SQ. FT. OFFICE AREA
STORAGE AREA
HEAT & A/C
WHITE BOARD
Contact Todd Will For More Information Mobile: 712-216-1066 | Office: 712-322-0291 | todd.wills@echogroupinc.com
eCatalog
4325 Gifford Road Council Bluffs, Iowa 712-322-0291 | |
EchoESP V6.1P
Made with FlippingBook Online document