Echo Rentals

Tools & Equipment

Hook Type Sheaves - 8,000 lb. Capacity HD hook sheaves. 4 sizes available: 12" diameter, 5"W, 24 lbs. - # 812

24" diameter, 6-1/2"W, 69 lbs. - # 824 36" diameter, 6-3/4"W, 101 lbs. - # 836

18" diameter, 6"W, 46 lbs. - # 818

Greenlee 441 Series Cable Feeding Sheaves Yoke frame slides into the end of conduit. 7 sizes available. 2" wide - # 441-2 3-1/2" wide - # 441-3-1/2

6" wide - # 441-6

2-1/2" wide - # 441-2-1/2

4" wide - # 441-4 5" wide - # 441-5

3" wide - # 441-3

Instruction Manual

HIS HDR6-12x7A HIS duct rollers are designed to assist in guiding cables into ducts or conduit and help reduce "Cable Scuffing" on the edge of duct or conduit. The "Slotted-Duct-Adapter" assists in removing this tool from the cable, once the cable is pulled into place.

HIS HRR-D12-7A / HRR-D10-5A HIS rim rollers are lightweight, with two high-strength sheave-type cable guides. The units can be used for guiding cable into or out of vaults and hand-holes. The powder-coated frame protects cable scuffing and locks to the edge of the vault when pull force is applied.

HIS HB4A HB4A cross-tray roller is designed for guiding cable into inside vertical risers in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB4A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.

HIS HB5A HB5A cross-tray roller is designed for guiding cables around horizontal elbows in cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers. HIS model HB5A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall. Optional clamps are available for other sidewall heights.

8