Echo Rentals

Tools & Equipment

HIS HB1A-9-STC Used for clamping universal cable tray roller HB1A-9 to the sidewall of the cable tray.

HIS HB9A HB9A cross-tray roller is a low pro le cross-tray roller assembly designed for guiding cable into outside vertical risers and through straight sections of cable tray. Place a series of these on the radius to create "Maximum Bend Radius" required by cable manufacturers, or several in-line on the straight section of cable tray. HIS model HB9A is equipped with a 48" long cross-tray bar and 2 tray clamps for 4" - 6" cable tray sidewall.

iTOOLco TR9010 10" 90° Trapping Tray Roller iTOOLco's 90° Trapping Tray Rollers install in 3 easy steps and are compatible with more construction substrates that the competition. 1. Drop-over, 2. Tighten, 3. Pin. Navigating difficult corners is a snap. 2 Trapping Tray Rollers of the same size combine to encase conductors and handle elevation changes. Opens and closes from either side.

Instruction Manual

iTOOLco TR9005 5" 90° Trapping Tray Roller iTOOLco's 90° Trapping Tray Rollers install in 3 easy steps and are compatible with more construction substrates that the competition. 1. Drop-over, 2. Tighten, 3. Pin. Navigating difficult corners is a snap. 2 Trapping Tray Rollers of the same size combine to encase conductors and handle elevation changes. Opens and closes from either side.

Instruction Manual

iTOOLco TRM750 5/8" & 3/4" Threaded Rod Mount Simply mount both brackets above or below your trapeze on the threaded rod, install the framing member, and drop the tray roller over. Once wire pull is complete, simply open the tray roller and drop conductors out into their nal nested position.

Southwire PB2000 BENDmax Power Bender 3/4"-2" EMT, IMC and Rigid conduit bender. Programmable springback incorporated into digital display. Large analog protractor for accurate bends. 2 degree leveling adjustment. Bends in vertical and horizontal planes.

Instruction Manual

10